ME/BF-109
Available for any size ME109 (or BF109).  All are the correct 82 degree units, with scale,
shock absorbing struts. The 79-80" has a 3/16" axle, the 88-100" have 1/4"axles. The axles
are set  for scale wheel angle. All Me109 gear are standard at 82 degrees, but can be built at
80 degrees if requested. Axle angle can be adjusted to your specific needs......
Me 109 gear, 82 degree (80 degree or other angle available on request at no extra charge) .

100" Pair of mains, with air cylinders & shock absorbing oleo struts $395

88" ESM pair of mains $375

79" Platt, or 84" Meister,  pair of mains with air cylinders & shock absorbing oleo struts $345

70-73" Me109 (cmp,esm,kmp, etc) $275

Door mounts, set of 4, $35 (any size)

Machined aluminum scissors available at $60

Scale, shock absorbing struts to fit factory or other aftermarket retracts, call or email.

All struts are shock-absorbing,  different spring loading rates available.

Shipping & insurance, within the cont. US $16, shipping & ins on struts only, $8.

Shipping on the smaller KMP gear is $13 in the cont US
Please see the Skyshark
page for struts for .60 size
kits using springair main
units with the 3/8" socket.
Scale struts are available separately also to fit springair
and other main retract units with a 3/8" or 1/2" socket.
E-Mail Lenny@Shindinmachine
KMP Me 109 factory
gear with Shindin
Machine struts.... the
struts come bored to
the same size as the
factory wire leg, with
two 6x32 setscrews  
for attachment. They
are bored 1" deep, so
you will need to cut a
piece of the original
wire strut down to 1 &
3/4" long, which will
fit into the factory
retract (3/4" deep)
and into the strut....
.
The gear for the 50cc ESM Me-109 are available and shipping now, and are  $375 per set.
The non-retract tailwheel fork for the Me109 (and others) is now available. Price varies
depending on wheel size (diameter/width), and length of strut, but usually it's around $50-$85 for
pretty much anthing in the normal size ranges. These can be had with pretty much any combo of
wheel/fork size, strut length, and shaft/socket diameter, email with your needs.